Automotive Camera
🌙 1. Poor night recording quality inside the car?
- Choose a camera with infrared night vision
- Avoid direct strong light (e.g., from streetlights)
- Adjust the camera angle to reduce glass reflection
- Avoid direct strong light (e.g., from streetlights)
- Adjust the camera angle to reduce glass reflection
📸 2. Backup camera image is blurry or foggy?
- Clean the lens (use alcohol wipes)
- Check waterproof seals (replace rubber gasket if necessary)
- Upgrade to an HD camera (recommended 1080P or higher)
- Check waterproof seals (replace rubber gasket if necessary)
- Upgrade to an HD camera (recommended 1080P or higher)
⚡ 3. Backup video feed is delayed or lagging?
- Insufficient head unit performance (common in older systems)
- Signal interference (check if video cable is routed near power cables)
- Low frame rate camera (choose models ≥30fps)
- Signal interference (check if video cable is routed near power cables)
- Low frame rate camera (choose models ≥30fps)
🛠 4. Backup trajectory lines inaccurate?
- Access reverse settings menu in the head unit
- Calibrate lines based on actual distance
- Some models may require calibration at a dealership (4S shop)
- Calibrate lines based on actual distance
- Some models may require calibration at a dealership (4S shop)
🔋 5. How is the backup camera powered?
- Reverse light power (most common, turns on automatically in reverse)
- ACC constant power (supports 24/7 monitoring, but consumes battery)
- Independent power (battery-powered wireless cameras)
- ACC constant power (supports 24/7 monitoring, but consumes battery)
- Independent power (battery-powered wireless cameras)
