1. Power On

- Short press once
- Prompt tone: “dee-lee dee-lee”
- Indicates the device has started

2. Power Off

- Short press twice, then long-press on the 3rd press
- Prompt tone: “dee dee” (two beeps)
- Indicates the device is off

3. Factory Reset

- Short press 4 times, then long-press on the 5th press
- Prompt tone: “dee-lee dee-lee dee-lee” (long beep)
- Clears all binding data

1. How to Pair the Tracker

iPhone / iPad
1) Open the “Find My” app
2) Go to “Items” → “+” → “Add Other Item”
3) Wait for discovery and complete pairing

Android
1) Open the “Find My Device” app
2) The system will automatically detect nearby trackers
3) Follow the prompts to complete pairing

2. Do I Need a Dedicated App?

- No extra download required
- iOS: Use the built-in “Find My” app (iOS 14.5+ required)
- Android: Use the built-in “Find My Device” (Android 10+ required)

3. Supported Phones

- iOS: iPhone/iPad with iOS 14.5+
- Android: Devices with Android 9+

1. Range & Coverage

- Bluetooth direct: up to ~140 m line-of-sight; typically 30–80 m in daily use
- Global locating: via Apple/Android crowdsourced network, not distance-limited
- Update frequency: every 3–5 minutes (not real-time)

2. How It Works

- Connects to your phone via Bluetooth
- Uses the global Apple/Android “Find” network to anonymously report locations
- No SIM card / standalone network required

3. Why Location May Be Inaccurate

- Unpaired device or low/empty battery
- Phone’s network/Bluetooth/location services disabled
- Signal-shielded environments
- Few/no nearby Apple/Android devices

1. Separation Alert

- App notification when the item leaves the safe range

2. Reconnect Notification

- Enable “Notify When Found” to get notified once reconnected

3. Sound Alert

- 10-second continuous beeping (≈60–85 dB)

1. Binding Limits

- Apple: up to 32 per Apple ID
- Android: up to 100 per Google account

2. Device Sharing

- Apple: share with up to 6 devices
- Android: share with up to 10 devices

3. Unpair & Reset

- Unpair: open “Find My” → “Items” → select device → “Remove Item”
- Important: you must both unpair on the phone and perform a hardware factory reset before re-pairing

1. Battery Life

- N Tag / W Tag: CR2032 coin cell (×1)
- W Card: CR2016 coin cell (×3)
- Low battery alerts on your phone

2. Replacing the Battery

- Open the top and bottom covers to replace

1. Prevent Unauthorized Use

- After binding, others cannot reset the device
- Mark as “Lost Mode” when missing

1. Water Resistance

- W Tag: IP68
- N Tag / W Card: not water-resistant

2. Suitable Items

- Keys / wallet / suitcase / backpack / camera and other belongings

1. No Response

- Check the battery (continuous beeping / no sound may indicate low power)
- Ensure the device isn’t physically damaged

2. Cannot Find the Item

- May be in an area without network coverage devices
- Check for shielded environments (metal containers, basements, etc.)

3. Search Tips

- Go to the last seen location
- Use “Play Sound” to assist

- Phone Bluetooth / Location Services / Network ON
- Device powered and within working state
- Meets the required OS version